Positive pressure tester for leakage of infusion set
Product introduction:
Applicable standards: the medical device sealing tester is a special equipment designed according to the relevant provisions in the national standards for medical devices, which is specially used to test the sealing performance of medical devices.
Positive pressure output range: 20KPa ~ 300kPa (adjustable), LED digital display, the error is not more than ± 5%.
Keep the positive pressure of the measuring system: do not drop 1kPa within 1 minute.
Test duration: 1s ~ 60s (adjustable), LED digital display, error no more than ± 1s.
Pressure output range: 20 kPa ~ 300 kPa higher than local atmospheric pressure,
Display mode: LED digital display; pressure output value can be set arbitrarily, and the calibration error is not more than ± 2.5% of the reading.
Test duration: 1s ~ 99.9 minutes, LED display, error is not more than ± 1s.
It is suitable for infusion set, blood transfusion set, infusion needle, anesthesia bag filter, pipeline, catheter, quick connector, etc.
External air compressor:
It can work continuously for at least 16 hours a day;
External compressed air (instead of air compressor) interface is available for online positive pressure detection of various medical devices;
Zsj8368-b infusion set injection parts test device
It is used with sz8368-b infusion set leakage positive pressure tester
Speed of puncture and cotton cloth movement: 500mm / min
Time controller: 1s ~ 60s (adjustable), LED digital display, the error is not more than ± 0.1s.
When the pressure is 50 kPa higher than the atmospheric pressure, the injection part is punctured with an injection needle with an outer diameter of 0.8 mm. After 15 s of insertion, there is no leakage within 1 min after pulling out.
Product Tags:
|
|
60s 20KPa Positive Pressure Tester For Leakage Infusion Set Images
|
